Functions and Features
1. Switch off the bar length error-free,
2. The double traction type,
3. The last meter of reinforced tune Ends pulled up,
4. Building wire tungsten steel,
5. Product wire using the ball end of the mold, transferred out of steel will not harm the surface.
Steel bending machine operating specifications are as follows:
1, placed bender, should choose a steel cutter machine china supplier more smooth, solid, broad place before and after Kannawa symmetrical triangular wooden wedge. 2. Do not place the power cable to the machines buttons, you should have received an additional control power switch. The motor should be grounded, ministries wire, electrical equipment should be well insulated. 3, the operation is prohibited other personnel into the operating area, running the motor, hydraulic pumps and other transmission parts found abnormal noise should stop after cutting the power for maintenance. Operation prohibit cleaning, lubrication. 4, we must add a little oil before use. Not use less than blocked shaft bending large-sized steel bar diameter bend, bend steel must first straightening work shall not be bent. 5, after work, turn off the power, mechanical cleaning and maintenance work. If outside, before leaving after the power switch box should be locked. 6, should pay attention to before starting the position and direction of bending steel protruded prevent open the wrong wounding. 7, the work should be checked before each transmission steel cutter machine manufacturer parts fastening bolt through the rear idle test confirmed safe before doing any work. 8. Replace the bent pin and a fixed pin midnight on the turntable, it should cut off the power to stop the rotation after. Steel cutting machine used in the process should pay attention to what
Steel cutting machine is one of the steel processing machinery. Mainly used for cutting steel 14 mm or less, you can also reinforced rust. There tune straight, pull the line agencies, cutting mechanism, steel frame length, frame and drive unit and other components. This can be reinforced for security processing.